|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
DC-DC 30 Watts JCL30 Series * * * * * * * 2:1 Input Range High Efficiency up to 91% xppower.com -40 C to +100 C Operating Temperature Fixed 270 kHz Switching Frequency Regulated Single & Dual Outputs Continuous Short Circuit Protection Standard Remote On/Off Specification Input Input Voltage Range * 12 VDC (9-18 VDC) 24 VDC (18-36 VDC) 48 VDC (36-75 VDC) * See table * Pi network * Turn on >71% nominal input, Turn off <63% nominal input * 12 V models 25 VDC for 100 ms 24 V models 50 VDC for 100 ms 48 V models 100 VDC for 100 ms General Efficiency Isolation Voltage * See table * 1500 VDC Input to Output 1000 VDC Input to Case 1000 VDC Output to Case * 1200 pF typical * 270 kHz typical * 1 MHrs to MIL-STD-217F Input Current Input Filter Undervoltage Lockout Input Surge Isolation Capacitance Switching Frequency MTBF Environmental Operating Temperature Case Temperature Storage Temperature Cooling Operating Humidity Shock Vibration -40 C to +100 C (see derating curve) +100 C max -40 C to +125 C Convection-cooled Up to 90%, non-condensing 30 g, half sine wave 18 ms pulse applied 3 times on each of 6 axes * 5-500 Hz, 3 g, for 10 mins on each of 3 axes * * * * * * Output Output Voltage Output Voltage Adj Minimum Load Line Regulation Load Regulation Setpoint Accuracy Cross Regulation Ripple & Noise Transient Response See table 10% via trim pin No minimum load required 0.5% max 0.5% max from 10% to full load 1.0% max 5.0%, see note 2 75 mV pk-pk max, see note 3 3% max deviation, recovery to within 1% in 200 s for a 25% load change * 0.02%/C * * * * * * * * * EMC Emissions * EN55022, Level A conducted & radiated with external components see application note * EN61000-4-2, Level 2 Perf Criteria B * EN61000-4-3, 3 V/m Perf Criteria A * EN61000-4-4, Level 3 Perf Criteria A* * EN61000-4-5, Level 3 Perf Criteria A* * EN61000-4-6, 3 V rms Perf Criteria A * EN61000-4-8, 1 A/m Perf Criteria A Temperature Coefficient Overvoltage Protection * 3.3 V models 3.9 V typical, 5.0 V models 6.2 V typical, 12.0 V models 15.0 V typical, 15.0 V models 18.0 V typical, 12.0 V models 15.0 V typical, 15.0 V models 18.0 V typical Overcurrent Protection * 120% typical Short Circuit Protection * Trip & restart (hiccup mode) Remote On/Off * ON >2.5 VDC or open circuit OFF <0.8 VDC or short circuit pin 2 & 3 Thermal Protection * Shuts down when case measures +110 C typical ESD Immunity Radiated Immunity EFT/Burst Surge Conducted Immunity Magnetic Fields *See note 4 DC-DC Models and Ratings Input Voltage Output Voltage 3.3 VDC 5.0 VDC 12.0 VDC 15.0 VDC 12.0 VDC 15.0 VDC 3.3 VDC 5.0 VDC 12.0 VDC 15.0 VDC 12.0 VDC 15.0 VDC 3.3 VDC 5.0 VDC 12.0 VDC 15.0 VDC 12.0 VDC 15.0 VDC Output Current 5.50 A 5.00 A 2.50 A 2.00 A 1.25 A 1.00 A 5.50 A 5.00 A 2.50 A 2.00 A 1.25 A 1.00 A 5.50 A 5.00 A 2.50 A 2.00 A 1.25 A 1.00 A Input Current(1) No Load Full Load 30 mA 1.87 A 30 mA 2.48 A 30 mA 2.84 A 30 mA 2.84 A 30 mA 2.84 A 30 mA 2.84 A 25 mA 0.92 A 25 mA 1.23 A 25 mA 1.40 A 25 mA 1.40 A 25 mA 1.40 A 25 mA 1.40 A 20 mA 0.46 A 20 mA 0.61 A 20 mA 0.70 A 20 mA 0.70 A 20 mA 0.71 A 20 mA 0.71 A Efficiency 83% 86% 90% 90% 90% 90% 84% 87% 91% 91% 91% 91% 84% 87% 91% 91% 91% 91% JCL30 Max Capacitive Load 15000 F 10000 F 2200 F 1000 F 1000 F 680 F 15000 F 10000 F 2200 F 1000 F 1000 F 680 F 15000 F 10000 F 2200 F 1000 F 1000 F 680 F Model Number JCL3012S3V3 JCL3012S05 JCL3012S12 JCL3012S15 JCL3012D12 JCL3012D15 JCL3024S3V3 JCL3024S05 JCL3024S12 JCL3024S15 JCL3024D12 JCL3024D15 JCL3048S3V3 JCL3048S05 JCL3048S12 JCL3048S15 JCL3048D12 JCL3048D15 9-18 VDC 18-36 VDC 36-75 VDC Notes 1. Input currents specified at nominal 12 V, 24 V or 48 V input. 2. Cross regulation is 5% when one output is at 100% and other is varied between 25% and 100%. 3. Measured with 20 MHz bandwidth and 1 F ceramic capacitor. 4. External input capacitor required, Nichicon FW series 1000 F / 100 V or equivalent. Mechanical Details All dimensions are in inches (mm) Weight: 0.11 lbs (48 g) 1.60 (40.64) 0.70 0.50 (17.78) (12.70) 0.30 0.10 (7.62) (2.54) 4 1.80 (45.72 2.00 (50.80) BOTTOM VIEW 5 6 7 0.04 DIA (1.02) PIN CONNECTIONS 0.22min (5.60) Pin 1 2 3 4 5 6 7 Single +Vin -Vin Remote On/Off No Pin +Vout -Vout Trim Dual +Vin -Vin Remote On/Off +Vout Com -Vout Trim 1 0.70 (17.78) 2 3 0.20 (5.08) 0.45 (11.43) Notes 1. 2. 3. 4. All dimensions are in inches (mm). Pin diameter: 0.04 0.002 (1.0 0.05) Pin pitch tolerance: 0.014 (0.35) Case tolerance: 0.02 (0.5) 0.60 (15.24) Application Notes Derating Curve 100 7 (7) 80 Load (%) TRIM UP 60 40 20 0 -40 -20 6 (6) 5 (4) TRIM DOWN 7 (7) External Output Trim Pins in brackets ( ) are for dual output versions Input Filter L +Vin +Vout 0 10 20 30 40 50 60 Ambient Temperature (C) 70 80 90 100 C1 C2 DC/DC Converter LOAD -Vin -Vout Remote On/Off Control Standard ROF logic is positive. Output On >2.5 VDC or open circuit Output Off <0.8 VDC or short circuit pins 2 & 3 C3 Model 12 VDC 24 VDC 48 VDC C1 330 F, 100 V 330 F, 100 V 330 F, 100 V L 12 H 12 H 12 H C2 100 F, 100 V 100 F, 100 V 100 F, 100 V C3 N/A N/A 1000 pF/2k V 27-Nov-08 |
Price & Availability of JCL3012S12 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |